ZETRON 2000 Series Specifications download pdf (Page 72)

Managing the Subscriber Database with ZbaseW

72 025-9034AA

Locations

Between the two of them, the ZbaseW and ZlinkW programs are capable of supporting the

configuration and database needs of several paging terminals. The Locations window is

used to enter the site-specific information required to communicate with each paging

terminal.

Site Name

This parameter is a name used to identify a specific paging terminal. The entry is left

justified and can contain up to 30 characters. The name string entered here is the name that

ZbaseW will use any time that it is prompting you to confirm which location you want to

communicate with.

Password

This parameter is used to hold the password required to gain access to the paging terminal.

The entry is left justified and up to 10 characters in length. If you are not using password

security at a site, then just leave this field blank.

Phone

This parameter is used to hold the telephone number, set the baud rate for a local serial

connection, or network address required to reach the site. If a modem is used to contact the

paging terminal, then this field holds the telephone number that must be dialed by the PC

modem in order to reach the modem attached to the paging terminal.

The letter “L” is used to indicate that a direct local connection is being used; from the

serial port on the PC to the serial port on the paging terminal. If no additional information

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 231 232

No comments

ZETRON 2000 Series Specifications Page 72