123
Format Windows
Multitone Pagers
(Mark IV/V/VI/VII, Special Option - consult Zetron)
The Multitone digital pagers (models Mark IV, Mark V, Mark VI, and Mark VII) are
available in tone-only, numeric display, or display + voice. These pagers are common in
Health Care applications where a voice message is preferred with some sort of numeric
status readout such as room number. The Series 2000 signals the Mark IV, Mark V, Mark
VI, and Mark VII pagers.
Capcode
(00000 to 99999)
A 5-digit number between 00000 and 99999. Valid digits are 0 through 9 inclusive.
Mode
(1 to 9)
Multitone Mark IV/V pagers can come with or without numeric readouts. The pager
display is only one digit, but depending upon the pager mode, you can select 1-, 4-, or 5-
digit messages that scroll through the pager’s one-digit display. Select the mode you want:
1 = No display message (Mark IV, V, VI)
2 = 1-digit numeric message, manually unsquelched voice (Mark IV, V, VI)
3 = 4-digit numeric message, manually unsquelched voice (Mark IV, V, VI)
4 = 5-digit numeric message, automatically unsquelched voice (Mark V only)
5 = 10-digit numeric message, automatically unsquelched voice (Mark VI only)
6 = Alphanumeric display pager with automatically unsquelched voice (Mark VII)
7 = Tone only pager with manually unsquelched voice (Mark IV)
8 = Tone only pager with manually unsquelched voice (Mark V, VI)
9 = Tone only pager with automatically unsquelched voice (Mark VII)
Notes:
1. You can make a mode Tone-Only or Tone + Voice by setting the voice limit field
appropriately.
2. With modes 1, 2, or 3, the subscriber has to press the Unsquelch Button on the
pager to hear a voice message.
Comments to this Manuals