ZETRON 2000 Series Specifications download pdf (Page 48)

Voice Prompts

48 025-9034AA

DisplaySaver

The speech used for the TimeStamp and Numeric Insurance features of the DisplaySaver

option is recorded at the factory and cannot be changed in the field. Different languages

are available; contact your Zetron salesperson for more information.

Record, Play, Erase System Voice Prompts

1. Using the subscriber database manager ZbaseW, choose a subscriber ID number in

the database to use for special access to the voice prompt subsystem. Set up this

subscriber record with the following:

a. Set the Status field on this record to “P” for Prompts.

b. Set the Voice Limit field to the maximum length of any prompt you are going

to record (a good value is about 25 seconds).

c. Set the Security Code field to a four-digit number that you can easily

remember. You will key in this number on your Touch-Tone phone for

password access to recording.

2. Use ZbaseW to Comm Update these database changes to the Model Series 2000

Paging Terminal.

3. Using a Touch-Tone phone:

a. Dial the Prompt access phone number.

b. You will hear “Enter the system prompt passcode” followed by one long and

four short tones. Enter your 4-digit security code.

4. You will then hear “Select a voice prompt” followed by a single prompt tone. At

this point you have the choice to record, play, or delete a voice prompt. You make

your selection by using a three-digit Voice Command Code (see Table 8).

The column labeled “Zetron Wording” is the wording used in the Zetron factory

default prompts shipped with the machine. This wording is carefully chosen to

blend prompts together smoothly; so reword your prompts with caution.

a. Key a three-digit voice command code as shown in the chart on the next page.

5. If you chose to record a voice prompt, the paging terminal will give you a single

beep, then you speak your new prompt; be sure to wait for the beep. To get the

Codes Description

001 to 299 record new prompts (records over the factory prompts)

301 to 599 play existing prompts

601 to 899 delete existing prompts

999 play special test tone for balancing the phone interface card hybrids

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 231 232

No comments

ZETRON 2000 Series Specifications Page 48