ZETRON 2000 Series Specifications Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 376
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
43
Configuring the Digi One™ SP Option
Figure 11: Printer Cable Wiring Diagram
Pentium CPU Card Parallel Printer Ports
When a 2200 paging terminal is equipped with the Pentium CPU card, the default printer
output is via the parallel port on the CPU card, connector J10 (see Figure 6 on page 34).
This is normally cabled to a DB-25 connector mounted on the terminal's hard drive
bracket in the bottom of the main chassis.
Earlier versions of the 2200 paging terminal provided only a serial port output for printer
activity. Many system operators have used this for other purposes than driving a printer.
One example would be logging the serial output to a text file on a PC. This provides a
record of every transaction or error occurring on the system.
There is only one supported way to convert the existing parallel printer output of the
Pentium CPU card into a serial output. You can purchase an after-market parallel-to-serial
data convertor and connect it between the parallel port of the paging terminal and
whatever serial device you are sending the printer port output to.
Configuring the Digi One™ SP Option
The configuration of the Digi One™ SP serial/IP conversion module is accomplished
through the Ethernet port on the device. The configuration takes place in two phases. The
first phase is carried out using a software tool provided by Digi International on CD-
ROM. It will require that the unit is connected to the network while being configured. The
second phase is carried out with the browser installed on your PC (such as Internet
Explorer). You simply enter the IP address of the module you want to work on into the
browser address bar manually.
1 Shield bare wire bare wire Shield 1
2 TXD white N.C. TXD 2
3 RXD N.C. white RXD 3
7 GND black black GND 7
4 CTS N.C. CTS 4
5 RTS N.C. RTS 5
22 RI N.C. RI 22
6 DSR N.C. DSR 6
8 CD N.C. CD 8
20 DTR N.C. DTR 20
Pin Signal Signal Pin
Model 2200
Female DB-25S
Printer
Male DB-25P
(15 foot cable)
(red wire not used)
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 375 376

Comments to this Manuals

No comments