ZETRON 2000 Series Specifications download pdf (Page 277)

277

The “.CUS” Files

Generic Function Codes

There is a capability we call Generic Function Codes. It is not in the default options.cus

file; it can be added if needed. If you need the described features, contact Zetron for

assistance in setting it up.

This feature is most useful with Golay (GSC) pagers that have both voice and display

capabilities. By using this Generic Function Code capability, callers can select to leave a

voice OR a display message with each call. This is particularly useful for emulating this

capability of the Motorola Modax paging terminals. It has also been used for HSC pagers.

Subscriber records in ZbaseW need to be set up as follows:

• The pager function code is entered as “C1”.

• The display limit is set > 0.

• The voice limit is set > 0.

• Optionally the Security/Function code voice prompt is turned on (good idea, & re-

record it to mention choosing voice or display).

• Optionally the Message prompt is turned on.

The caller experiences:

• The caller calls.

• Optionally hears the function code entry voice prompt (best if re-recorded).

• Hears a beep-beep-beep prompt.

• The caller enters 7 for a display page, or defaults to a voice page (or the caller can

enter a 1 for a voice page).

• Optionally hears the message prompt, as appropriate for the function code entered,

prompting for voice (if 1 or default) or display (if 7).

• Hears a beep-beep-beep prompt if function code 7 - display message.

• Hears a beep if function code 1 / default - voice message.

• Caller enters (speaks or punches in) their message.

1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 375 376

No comments

ZETRON 2000 Series Specifications Page 277