ZETRON 2000 Series Specifications download pdf (Page 213)

213

RAID Hard Drive

2. To copy files from old SCSI type, “copy d:\zdir\<filename> c:\zdir”.

3. The following files should be copied:

Oparam.cds

Options.cus

Trunks.cus

Network.cus (may not be present)

Events.cus (may not be present)

Messages (may not be present)

Group.bin (may not be present)

Sdb.ptr

Subs2000.??? (to determine this filename type, “

sdb” at the “+” prompt)

Transferring Your Custom Voice Greetings

Accomplishing this task will require that you first re-label the drives and then copy the

files from the old drive to the new RAID array. Once you are finished with that you will

remove the old drive and assign the RAID array to be drive C: in the system.

♦ Labeling drives - SCSI = C: and RAID = D:

1. Power down system.

2. If not already done, install the old SCSI drive per above.

3. Set switch D1 on front of RAID cage to the down position.

4. Power up system.

♦ Copying files from SCSI Drive (C:) to RAID Array(D:)

1. In ZbaseW select COMM/ZlinkW.

2. At + prompt type, “md d:\v”.

3. For each file you need to copy type,

“

Vget <filename> c:\v\<filename>”

Example:

vget p5551212 d:\v\p5551212

Note If you have a VGET batch file type, “batchrun vget.bat” to copy all

files. (See

Creating Batch Files for Transferring Custom Greeting

Voice Prompts

on page 214.)

Note Custom greeting filenames will be in one of the following formats:

s5551212 = Mailbox/Notify mode greeting

p5551212 = Paging/Insure mode greeting

a5551212 = Announcement mode greeting

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 375 376

No comments

ZETRON 2000 Series Specifications Page 213